Banner Flex Seaming Machine

Banner Flex Seaming Machine

Parameter:

1. Alternant electric voltage: 220V/50Hz;
2. Upper limit power: 2000W ;
3. Adjustable work temperature: 50-600°C;
4. Adjustable: self-move speed 0.8-15M/per minute;
5. Specification: 450*310*320mm
6. Whole weight: 10 kg;
7. Splicing width: 2-5cm.

Application:

laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

When use:

1. Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;

2. Turn on the machine, prepare warm up about 2 minutes;

3. Bring up the machine, and place the roll at the end of the overlap edge;

4. According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the

machine start running, after go pass the overlap edge, the two disjunct banner will be well joined in one.

Package:

More models of flex banner seam machine