Automatic Thermal Laminating Machine/laminator

Configuration

1 Adopting automatic feeder, so that the feeding, laminating, separating can totally inline for laminating job.

2 The overlap use servo -motor control, when operating the machine just needs to set the paper length on touch screen, the machine can run automatically, the overlap tolerance is about +2mm

3 the heating roller is use heat transfer oil, the temperature meter is inside the oil, not touch with the roller surface, so that get the accurate temperature.

4 Adopt the jogger for collecting the paper, after pneumatic separating paper can collect well with the vibrating table; no need extra people for collection.

5 Use pneumatic pressure, and can get bigger pressure, and easier for usual maintenance.

6 The main electrical products use import and Taiwan produce, to make sure the stable for running the machine.

7 use the anti-curve for thin paper, make sure the thin paper after laminating is not decline and difficult for paper collection.

8 the film loading is using the air shaft, easy loading, the film feeding use pneumatic brake blocked have very stable tension.

Technical Parameter: