Autoamtic woodworking straight line PVC edge banding machine ZEB600-5B

Autoamtic woodworking straight line PVCedge banding machineZEB600-5B

edge banding machineFeature:

1. Gluing and edging unit adopt lower glue tank, dual-screwy feeding unit,

to make feeding gule conveniently and equally.

2.End cutting unit with two independent motors, for cutting the exceeding edge on front and rear side of the panel.

3.Rough trimming unit to trim the exceeding edge on the top and bottom side of the panel,

it's complete with tow motors and copying.

edge banding machineFunction:

Edging--end cutting--rough trimming--fine trimming--scrapping--buffing

Optional:

Notching

Parameter:

Thickness of panel:10-60mm

Height of belt:0.4-3mm(pvc)

Max thickness of timber:6mm (wooden strip)

Min width of panel:≥80mm

Min length of panel:≥120mm

Max meassurement of belt exceed panel (each side) :1.5mm

Panel feeding speed: ≤18m/min (stepless)

Air pressure: 0.7mpa

Power supply: 380V 3N/PE 50HZ

Panel feeding motor: 2.2kw 50HZ

Glue spindle motor: 0.55kw

End cutting motor: 2×0.5kw 12000r/min 200HZ

Fine trimming motor: 2× 0.73kw 18000r/min 200HZ

Fine trimming and corner rounding motor: 2× 0.73kw 1800r/min 200HZ

Buffing motor: 2 × 0.18kw 1400r/min 50HZ

Heating power of glue tank:2.45kw

Power of accessorial heater:0.22kw

Total power:8.04kw

Total current: 16A

Hot melt glue temperature:180-200°C

Overall dimension:5500 × 1410 × 1630mm