Home  >  Industrial Supplies  >  Air-Compressors

1.CE air compressor, 2.Original Atlas copco Air End, 3.SKF bearing, 4.energy saving screw air compressor - details see: https://www.machineto.com/atlas-copco-air-compressor-10210443

New designscrew compressorbest selling model

The new design BLT-75A compare with other brand air compressors have the following super advantages

1. Inside the air compressor with two pieces oil filters, so the filtering purity is higher than one piesce oil filter.

2. The sound arrester is orginal import from European, so when the air compressor is working,but the noise level is very small, accord with protect environment concept.

3. The new design air end is origina import from Sweden Atlas Copco,the same pressure, but the air discharge is bigger,higher effeiceny,save power.

4. Comped structure, smaller area,convenient to maintenance.

5. Save lubricant oil,.the new design just need 35 Llitre,the old one need 50 Litre, save maitenance cost.

The screw air compressor main configures as follows

1,Air end :Sweden Atlas Copco

2,Bearing:100% Sweden SKF(LIFE:60000hours )

3,Solenoid valve :CEME(Italy)

4,Electro motor ABB WOLONG

5,Thermostat valve Austria(Hoerbiger)

6,Pressure sensor Switzerland Huba(imported with original )

7,oil tank : Shanghai Shenjiang

8,Oil filter American HANKISON

9,Oil and gas separator American HANKISON

10,Lubricating Oil Sweden Atlas screw air compressor oil(imported with original)

11,Suction valve Sweden Atlas(imported with original)

12,Pressure valve Hoerbiger(Austria company)

13,PLC Schneider Electric (France)

14,Oil systerm configuration of the pipeline were chrome-plated brass

More than 80% are imported from famous brand-new accessories suppliers!

specification

Model		Screw air compressorBLT-75A
Compressed condition		General situation
Gas media		Air
No of stage		Single
Inspiration situation
Atmospheric pressure	Kg/cm2 A	1.033
Ambient temperature	°C	46
Relative humidity	%	80
Discharge situation
Largest discharge pressure	Mpa	0.75	0.85	1.05	1.25
Free air delivery	M3/min	10.50	9.80	8.80	8.00
Use pressure	Mpa	0.7	0.8	1.0	1.2
Discharge temperature	°C	Ambient temperature +15°C
Free air delivery control		0~100%
Motor Data
Moto power	kw	55
Motor speed	Rpm	1480
Electricity	V/PH/HZ	380/3/50
Starting method		Y-Δstart
Insulation grade		F grade
Protect grade		IP54
Drive method		Belt drive
Other data
Shaft power	kw	55
Cooling method		Air cooling
Kind of Lubricant		Special lubricant
No of Lubricant	L	35
Noisy level	dB(A)	68±2
Oil content	PPM	<2
Weight	kg	1600
Dimensions (L*W*H)	mm	1585*1170*1800