Mini HS8-48 More than 98% hatching rate
1.The incubator has a two-fan cooling/heating system,With a sepate air heater coil at the top and a water heater element in the water bath below.
2.The system includes a large plastic hatching basket,Which will work as a brooder for the first couple of days of the chicken life
4. Automatic incubator no egg turning needed!(unless wanted)
5. Contains a built in fan to keep air circulated for hatch
6. Easy to operate, even your kid can learn to use it.
7. Comes with water pan for adding water and keep humidity
8. Automatic manufacturer base temperature programmed.
9. Suitable for classroom experiment, hobby or home based hatchery (chicken, pheasant, quail and turtle eggs included)
10.Temperature setting range:18-45°C
Other Models
Model | Capacity | Dimension | Weight | Power |
| Chicken | Duck | Bird |
| HS9-7 | 7 | 7 | 7 | 17*18.5*15cm | 0.6kg | 20W |
| HS8-48 | 48 | 48 | 48 | 53*29*50cm | 6kg | 80W |
| HS-96A | 96 | 48 | 96 | 50*50*45cm | 7kg | 80W |
| HS-96B | 96 | 48 | 96 | 50*50*55cm | 7kg | 80W |
Chinese brand farm machinery mini chicken eggs incubator
Capacity:48 Chicken eggs
48 Quail eggs
48 Bird eggs
24 ostrich eggs
Mini incuabtor ( automatic egg tuner )
Incubator size: 55*29*53CM
Incubator Weight: 5kg
Package: Foam protection inside , Carton Package outside
Package weight:10kg
Delievery time :3 working-days after payment
You can add water without opening the machine. Directly using tool to add water outside.
The lid is transparent and visual, then you can observe the whole hatching process.
The heating pipe has been improved. It will stop working when temperature exceeds, which avoids machine self-igniting.
High quality and best service.
1. Test your incubator to see if it functions properly.
2.Connect the egg turner plug to the control plug inside the egg compartment.
3. Fill one or both water channels depending on local humidity levels.
4. Set the eggs with the pointy side down.
5. Close the lid and switch on the incubator.
6. Press the reset button (left green button) to reset and start the day counter from “0”.
(this will also rest the egg turning countdown back to 1:59)
7. Keep an eye on the humidity reading and fill the water channels when needed.
(normally every 4 days)
8. At day 18 you should remove the tray with the turning mechanism and place the
eggs on top of he bottom grid.
9. At the same time it is important to fill both water channels to increase the
humidity. (this is very important to ensure that the eggshells are soft enough for
the chicks to break through.)
10.You should never open the lid when the chicks start to hatch. If you do, the loss of
humidity will cause the eggshells of the unhatched eggs to dry out and they won’t
able to break through the egg.