6000L/H auto purified water Treatment System for drinking water

A. Description:

reverse osmosis system, the raw water is tap water, first goes by pre-treatment, then by RO treatment. Through those treatments, can remove dissolving salt 99% and harmful materials, like particle, colloid, organic impurities, heavy metal ions, bacteria, viruses and heat source, etc. the system salt rejection rate gets 96-98%, outlet water conductivity gets ≤10μs/cm².

B. Process:

raw water+ raw water tank+ raw water pump+ sand filter+ carbon filter+ softener (optional)+ security filter+ high pressure pump+ ro system+ pure water tank+ UV sterilizer (ozone generation)+precision filter+ water supply point

C. Parameters:

1. capacity: 6000LPH

2. rated power: 15.0Kw/H

3. power supply: 220V/50Hz, 380V/50Hz

4. total power capacity: about 19.5Kw

5. water recovery rate: 50-70%

6. desalting rate:97-98%

7. conductivity of raw water: ≤400μs

8. conductivity of pure water: ≤10μs

D. Characteristic:

1. reverse osmosis system core components are imported membrane module.

2. automatically stop when no water and low pressure or full of water.

3. automatic control, reverse osmosis membrane auto wash, to reduce pollution speed.

4. pure water tank auto makes water when lack of water

5. low pressure switch protect high pressure pumps from damage, cause of stopping water supply.

6. high pressure pump, which is high efficiency and low noise, reduces the operating noise and energy consumption

7. water production electric conductivity watches the water quality continuously

8. inlet and outlet water pressure gauges, monitor ro pressure differential online, to point the time for washing

9. automatic shut down valve, to aviod water continue flowing in when machine stops

E. Functions:

1. Raw water pump: provide pressure to quartz sand filter/ activated carbon filter

2. Quartz sand filter: get rid of turbidity, suspended mater, organic matter, colloid ect.

3. Activated carbon filter: remove color, free chloride, organic matter, harmful matter and so on.

4. Micron filter: prevent any deposition of large Particles, most of the bacteria, and viruses going into RO membrane, the accuracy is 5 um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

5. High pressure pump: provide high pressure to RO membrane(at least 2.0Mpa)

F. Service:

1. Installation guideline.