3 ton hydrauilc closed die forging hammer

Features of hydraulic closed die forging hammer:

1.Electricity Saving than steam hammer.
2.Space saving
3.Time saving
4.Protect environment for hydraulic closed die forging hammer.

Hydraulic closed die forging hammer can save more than 80% energy comparing with the steam forging hammer and the forging hammer with compressor.

Specifications:

Type: C86-75 (3 ton)

Blow energy: 75 KJ

Max stroke: 1250 mm

Blow frequency: 5 blow per minute

Motor power: 55KW

Oil cooler power: 38 KW

Tup/Die seat front to back length: 8001 1000 mm

Distance between guides: 700 mm

Outside size: 3200*1800*7100 mm

We not only manufacture new hydraulic forging hamemr, but also can convert the steam forging hammer into hydraulic forging hammer. After converting the steam hammer, the main advantages are as following:

1. Electricity Saving than steam hammer.
Comparing with the steam hammer, hydraulic forging hammer can save about 80% energy. Hydraulic forging hammer is driven with hydrauilc, and the hammer rod is move up and down qith compressing air. So when blowing, just the compressed air in upper cavity of hammer rod drives the hammer rod goes down, the motor will not load work. When lift the hammer rod, the motor running, so the hydrauclic forging hammer can save 50% energy of the motor power, also the hydraulic forging hammer working without any boiler and compressor.

2. Time saving than steam hammer.
On steam hammer and compossor hammer, you should burn the boiler or run the air compressor long time before starting the hammer. On hydraulic forging hammer, the hammer can work when connect power supply, it can work within two minutes.

And if there are some problem happened on the hammer, the steam or compressed air you got will be wasted, on hydraulic forging hammer, you just need stop the motor, no waste.