Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Casting Machinery

1.Die casting machine Factory, 2.30 years experience, 3.Mitsubish PLC, 4.YUKEN valve, 5.Certificate by Bureau Vertias - details see: https://www.machineto.com/280ton-die-casting-machine-aluminum-alloy-machine-factory-in-ningbo-10160936

Strategy

In Ningbo Dongfan Die-casting machine Tool Co.,Ltd., the goal of manufacturing famous products and developing the company for centuries has been passed on from generation to generation. In past 30 years, we always have perisistently pursue to provide perfect cold/ hot chamber die casting machine and sincere service.

* With a history of over 30 years * Factory Area : 40,000 square meters

*Employees : More than 500 *Production Capacity : 10,000-sets yearly capacity

*Company owed Tech & Research center * Main Machines: 100sets

Zinc & Aluminum & Brass Horizontal cold chamber die casting machine

We can supply this lead & zinc alloy die casting machine with the die locking force from 160KN to 1800KN. That is to say the scale of machine is 25ton to 330ton. This allows you choose the most suitable scale machine for your production. We do best in the manufacturing process from the material,including forging steel and iron plates, to maching, japaning and assembly.

Have Machine Already

If you already have machine, you can tell your demand in detail, then let's discuss what can we do for you. We can help you do no matter the mold working or machine spar partes.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Here,J1128K, this cold chamber die casting machine is equiped with Mitsubishi PLCand screen,

YUKEN electronic valve,

SUNNY vane pump.......

SCAN:

Suitable for aluminum,zinc and copper alloy

PLC andperson-machine

4-rod pilot elastic framework for excellent rigidity

Proportional relief and flow control valves

PLC and person-machine interface

Efficiency: maximum injection rate over 6m/s

Minimum boosting time less than 20ms

What product this machine can make?----- The cold chamber die casting machine is suitable for die casting of non-ferrous metal with low melting point, such as aluminum, znic and copper. It is widely applied for die casting of fittings of automobile and motorcycle, and parts for instrument and meter, and household appliance hardware of daily necessities.

Some machine device ---- This die casting machine is equipped with programmable logic controller (PLC) and Graphics operation terminal (person-machine interface) that are imported from Japan. The simple operating interface and proportional relief and flow control valves ensure easy operation of parameter and program setup. Die locking adopts crank expanding structure, 4-rod pilot elastic framework and has excellent rigidity, Advanced double-loop and 4-steps hydraulic injecting system that is constant and effective; maximum injection rate over 6m/s and minimum boosting time less than 20ms. The machine is superior in performance, and offers reliable an somooth operations, it owns trouble diagnosis and shooting function.

2.Main Technical Figures Table

	Technical Figures	Unit	Figures
Spotting	Spotting force	kN(ton)	2800(280)
	Platen dimension(H×V)	mm	930×900
	Inner space between pull rod (H×V)	mm	610×580
	Diameter of pull rod	mm	110
	Stroke of spotting	mm	480
	Max. thickness of die	mm	680
	Min thickness of die	mm	280
Injection	Injection force	kN	340
	Stroke of Injection	mm	425
	Diameter of standard Injection room	mm	50/60/70
	Dosage of metal per shot(Aluminum)	Kg	1.6/2.2/3.1
	Punch nun output (counted from fixed plate install surface)	mm	150
	Shot center position (0 is center of machine plate)	mm	0, -160
Ejection	Ejection Force	kN	150
	Stroke of Ejection	mm	110
Time per Cycle	Total time of die open&close, ejection& ejection return, injection&injection back.	s	14