Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

2013 high technology Bucket elevator for aac line, 1.stable and reliable operation, 2.widely used, 3.easy maintain, 4.CE ISO - details see: https://www.machineto.com/2013-high-technology-bucket-elevator-for-aac-line-10196841

2013 high technology Bucket elevator for aac line

Working principle of Bucket elevator for aac line:

Hopper to scoop up material from the hopper, conveyor belt or chain with the upgrade to the top, flip down around the top rounds, bucket elevator tilt the material into the slot, with bucket elevator drive transmission with general with rubber band, below or above installed in the drive pulley and bend pulley on the following.
Bucket elevator are generally equipped with a chassis, to prevent the dust in the bucket conveyor.

The main features of Bucket elevator for aac line:
(1). Big conveying capacity
(2). High hoisting height
(3). Stable and reliable running
(4). Long service life.

Application of Bucket elevator for aac line:

Bucket elevator is a fixed mechanical conveyor equipment, mainly lifting powder, granules and small lump materials continuously and vertically, widely used in feed factory, flour mill, rice mill, oil factory, starch factory, grain depot and ports.

Features of Bucket elevator for aac line:

1. Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

2. Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4. The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

5. Wide application:bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.

Compent of high capacity sand bucket elevator

It consists of head section with driving pulley, elevator boot (down section) with take-up pulley, elevator casing, driving device and back stop ,braking device. there is a inspection hole on elevator casing, to oberve all operation.

Driving device is equiped with YZ reducer and ZQ reducer. YZ axis reducer is directly coupled with pulley shaft. this design can omit driving platform with compact structure, light weight.

Also, fixed security protector on bucket elevator: belt speed detector, belt alignment device, backstop, etc, to ensure safety operation.

Technical parameters of Bucket elevator for aac line:

Type	Hopper form	Conveying quantity (m3/h)	Hopper width (mm)	Hopper volume (L)	Distance between hopper (mm)	Belt width (mm)	Hopper speed (m/s)	Block of material (mm)
TD160	Q	5.4	160	0.5	280	200	1.4	25
	H	9.6		0.9
	ZD	9.6		4.2	350
	SD	16		1.9
TD250	Q	12	250	1.3	360	300	1.6	35
	H	22		2.2
	ZD	23		3.0	450
	SD	35		4.6
TD315	Q	17	315	2	400	400	1.6	45
	H	30		3.6
	ZD	25		3.8	500
	SD	40		5.8
TD400	Q	24	400	3.1	480	500	1.8	55
	H	46		5.6
	ZD	41		5.9	560
	SD	66		9.4
TD500	Q	38	500	4.8	500	600	1.8	60
	H	70		9
	ZD	58		9.3	625
	SD	92		15
TD630	H	85	630	14	710	700	2	70

pictures for machine

pictures for factory