2013 engineer recommended professional belt drier - 008615803823789

The working principle of belt drier

• The coal briquette is sent to the mesh belt by the belt conveyor , the hot air produced by the stove contact with the coal briquette fully , ant during the delivery process , the moisture is steamed away , the steam is let off from the head of the box dryer.after thebox dryer, it will be installed a cyclone, and it will prevent the pollution .

Mesh Belt Drier for Wood Pellet and Charcoal Pellet

• Mesh belt dryer is a kind of batch,continuous production drying equipment,its mainly heating solution includes electric heating,
• steam heating and hot air heating.The mesh belts are made by 12-60 mesh steel wires.The main principle is that the materials is spread uniformly on the mash-belts,transmission device will drive the mesh-belt into reciprocating movement inside the dryer.Meanwhile,the hot air will flow and touch the wet materials,the evaporating
• steam will be discharged into air by special site,the dryer can be made into all the steam ar discharged,the material will achieve
• the purpose of drying.In order to save the project site,the dryer can be made into multi-layers.The widely used dryer is 2 rooms with three layers or 2 rooms five layers,length is 6-40 m,effective width is 0.6-3.0 m.

advantage of mesh belt drier

• 1. Small occupation, low investment, high energy efficiency, yield, and evaporation intensity, standardization of production, production increased according to the number of segments.

• 2. length can be adjust 3-20 meters, layer can be 1-5 layer, the temperature can be up to 200 degrees, heating mode: oil heating, electrical heating, gas heating, hot air heating, which can realize the automatic temperature control and manual control, transmission speed can realize stepless speed regulation. Products suitable for kinds of shape, flake, strip, etc.

Main technical data of belt drier