20/63 mm manual temprature control PPR welding machine

20/63mm manual temprature control PPR WELDING MACHINE

YMG-series temprature pipe welding machines are suitable in welding various
plastic pipes like PPR pipes, PE pipes, PB pipes, PE-RT pipes, PB pipes,etc,
these kind of micro digital welding machines are equipped the digital temperature
of industrial class, with the excellent features of controlling the temperature precisely
and flexibly. The handle is made of engineering rubber, it has the good insurability,
and can resist the high temperature. In addition, all the moulds are covered with American
famous coatings Teflon, to protect the plastic pipes from adhering, these micro digital
welding machines can ensure the plastic pipes against leakage and break,
they are all necessary pipeline tools, the concerned products of this kind are as follows

Technology parameter

1)temperature rang:0-300degree

2)voltage rang:220±25v

3)power:600w 50HZ

4)specification:20mm 25mm 32mm 40mm 50mm 63mm

5)welding material: PPR PE PB

6)Working temperature(°C):240-280,best temperature is 260

7)Working range:20-63(mm)

8)Foot: A special foot with clamp that enables working at any location

9)Safety indicators: the insulation resistance of not less than 1M
10) Leakage current: ≤ 5mA (AC RMS).

Advantages:

1,100% be test its power, voltage , temperature before packing.

2,We have own CNC machine producing sockets and other spare parts.

3,produce capacity: 20000 pcs /month.

4,Minimum order:500pcs for OEM order(with your logo on goods).

5, CE(sts) Certificate and quality report

6, 1 year guarantee

7, leading brand long time partner

Using

1 Place the machine on the support. Fix and tight the moulds with the wrench .Please set the smaller moulds in front usually.

2 Turn on power . red indicators show the machine is heating. Red indicator does not shine, the machine has stopped heating. And it is the time for working.

Caution: Do not plug in without ground wire

3 Cut the pipe. Push the pipe and fitting into the moulds for some time (See the table). Pull them out and insert the depth needed steadily .Please do not screw the pipes and fittings