+ 1500kg/ h wood pellet making line

Pellets ( 6mm, 8mm) wood pellet making line

I.The advantage of the JMX-9S wood pellet making line

Wood pellet mill is applied to make the agro-forestry wastes into solid fuels or wood pellets. It includes an imperative feeder system, stainless screw conditioner, high quality gearbox, ring die and lubrication system. The material is transferred to the conditioner by a screw feeder, then the conditioner can make different materials fully mixed. The conditioner plays a key role in softening raw materials by utilizing water or steam. After softening, the raw material is sent by a feeder to the pelletizing chamber. By spinning rollers in the chamber force the material through the holes of the die, thus pellets are formed. After pelletizing, the length of the pellet can be cut according to different user's request.

• full automation : it has theautomatic oil-supply devicethat can add oil for the , you don't need to add oil for the roller every 2 hours , so the machine can keeps on working a full day without a stop.
• ring die : double layers, both sides of the ring die can be used , thus the life time of the molds can be reach up to produce 1500 ton pellets.
• less labor , two people is enough to operation the machine.
• wearing parts : the wearing parts of the machine are the gear of the roller , molds .
• Widely suitability: All kinds of biomass raw material can be used in this machine,for example: palm fiber, sawdust, straw, rice husk, peanut shell, bamboo powder, alfalfa powder etc.
• The maintenance: The machine belongs to high tech , full automatic machine which do not need Artificial maintenance , in order to keep the machine work well, the only thing need to do is making sure the grease cylinder( installed in the back of the power distribution cabinet) always full of engine oil.

II.Specification of wood pellet making line

III.Working principle of wood pellet making line

• Through the belt conveyor, the materials get into the storage, then screw conveyor in the storage will feed material to the pellet forming chamber automatically and orderly.
• In the forming chamber, two gear and mold help to form and press pellet, Gear rotate to press pellet come out surround.
• Automatic cutting equipment around the mold, which can cut pellet automatically, it can also adjust the length of pellet.
• During the process, the oil supply device can lubricate the gear, mold and bearings of the molds.

IV.Pellet features of wood pellet making line

• Pellet is newstyle energy which is renewable, environmental protection,it is also clean and low cost.
• Pellet (biomass briquette,biomass pellet,wood pellet) is widely used in heating, biomass boiler, household gasification furnace, industrial boiler, hotels, restaurants, bath in industries as heat source.
• High density from 0.9-1.6g/cm3,easy to store and transportation,Calorific value can be 3500-5500Kilocalorie.

The Operation Procedure of wood pellet making line

Spare parts of wood pellet making line (Gear ,Molds)

Finished Products of wood pellet making line

The Visiting of Our Foreign Clients

Delivery of wood pellet making line