1400mm aluminum foil cold rolling mill

irreversible aluminum foil cold rolling mill

A, process outline:

1.1. Rolling material:

Material: tin and alloys

Slab: ~ 25 mm thick 500 mm ~ 700 mm wide length: 200 ~ 500 mm

1.2. Rolling finished product:

Material: tin and alloys

Plate: finished thickness: 8 ~ 10 mm width: 500 ~ 700 mm length: more than 1500 mm

1.3. Equipment design and manufacturing range:

300 x 800 two roll hot rolling mill 1 set Include:

1) press 1 set of devices

2) frame 1 set of assembly

3) roll assembly 1 set

4) main transmission device 1 set (the Lord deceleration machine, main motor, one word gear box, connecting shaft, coupling)

5) 1 set of control system

6) before and after each one set of the roller

B, equipment supporting process and technical parameters:

2.1 the mill work form: reversible

2.2 technological process:

A plank: thick 25 mm , wide 500 ~ 700 mm billet reheating furnace, the heat the process need to temperature, the stove with tongs to have laid right of rolling mill roll gap for the first time, A rolling passes under the pressure of 30%, rolling mill, the second set after reverse way time roll gap, material is passed back, so passive roller about 3 ~ 7 way, average of reduction control in 25 ~ 30% into talents. (a process is complete)

this machine is mainly used to roll average routine steels,ideformed steel,copper,aluminum product.

aluminum steel,steel window and other steels.that wre used and srap.

use explanation:

the aluminum beillt seminfinished product continuous casting tanden rolling craft was introduced from the overseas in the 80's .that advanced technique of production .

it's basic flow was:aluminum ingot--smelting furnace--settlement stove--deaeration--filtration--casts month--grips machine--middle unit--coiler