100W CO2 laser tube for CO2 laser engraving cutting machine

100W CO2 laser tube, 1. Promised Quality, 2. Good Light Spot, 3. Long Life, 4. Power:25W-300W - details see: https://www.machineto.com/100w-co2-laser-tube-for-co2-laser-engraving-cutting-machine-10231018

Place of Origin:Shanghai China (Mainland)	Brand Name:Goldensign	Model Number:100W	Model/Length (mm):pu1800
Outer Diameter (mm):60	Output Power (W):95-110	Rated Power (W):100	Ignition Voltage (KV):20-23
Ignition Current (MA):6-9	Working Voltage (KV):16-17	Working Current (MA):20-25

100W CO2 laser tube for CO2 laser engraving cutting machine

contact supplier for 100W CO2 laser tube for CO2 laser engraving cutting machine

100W CO2 laser tube
1. Promised Quality
2. Good Light Spot
3. Long Life
4. Power:25W-300W

The Shanghai Puri 60W-100W small&medium power CO2 laser tube mainly used for laser engraving and cutting, applies to the vast majority of domestic the laser machinery manufacturing. Puri laser tube with middle & small power is excellent in good laser spot mode, enough power, long life, etc...
Working Principle: high-pressure discharge stimulate high concentration CO2 to generate laser.
Laser Wave Length: 10.6um.
Laser Mode:low order mode.
Water-Cooling:purified water, appropriate temperature 10-35°C.
Working Environment:temperature 5-35°C, humidity 10-60%, clean environment, no serious pollution.
Working Current:16~22mA is appropriate (excessive current will affect laser power and laser tube lifetime.
Safety Demand:CO2 laser tube outputs invisible light, positive with high pressure, if necessary, eyewear is essential.
Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation. )
Laser State:
1, There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;
2,On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.

Puri CO2 Laser Tube Parameter: (Testing & Waiting):

Model/Length (mm)	Outer Diameter (mm)	Output Power (W)	Rated Power (W)	Ignition Voltage (KV)	Ignition Current (MA)	Working Voltage (KV)	Working Current (MA)
pu1200	60	60-70	60	18-20	6-8	14-15	18-20
pu1600	60	80-90	80	20-22	6-8	14-15	18-22
pu1800	60	95-110	100	20-23	6-9	16-17	20-25