Home  >  Chemical Process Machinery  >  Pressure Vessels

Q345R LPG pressure vessel, 1>100 m3 LPG, 2>LPG vessel DN 3200, 3>Vessel Corrosion allowance 1 mm, 4>ISO,SGS LPG pressure vessel - details see: https://www.machineto.com/100-m3-horizontal-lpg-pressure-vessel-10301024

100 m³ LPG PRESSURE VESSEL (DN3200 mm)

HUBEI HELI SPECIAL AUTOMOBILE MANUFACTURE CO.,LTD which is one of the largest manufacture of purpose vehicle and construction equipments in China.

We can produce all kinds of LPG equipments, eg: LPG horizontal storage tank, LPG tank container, LPG tank semi trailer, LPG tank truck, LPG pressure vessel.

This LPG pressure vessel just a sample, if you have special requirement, please kindly contactor withZenger Zeng.

Cell: 0086-13707175765 / Tel: 0086-27-84952953 / FAX: 0086-27-86709802

Following is the mainly specification of the 100 m³ LPG pressure vessel.

LPG PRESSURE VESSEL SPECIFICATIONS		EMERGENCY CUT OFF DEVICE
Product Model	LPG pressure vessel	Model	Gas Valve: Liquid valve:
Overall dimensions (L*W*H)	13050*3240*3740mm	Nominal diameter	Gas Valve: DN25 Liquid valve: DN50
Tank dimensions (Diameter*Thickness*L)	DN3200*20*13050 mm	Control method	Manual machinery
Net weight	Approx 22901 kg	Closing time	≤10 sec
Vessel type	III	Melting close temperature	70±5 °C
Designing pressure	1.77 Mpa	Emergency cut off type	Emergency shut-off valve and valve combination of over-current limit
Working pressure	≤1.62 Mpa	LIQUID INDICATOR
Designing temperature	-19~+50 °C	Model	UHZ-518C14
Loading material	Liquefied petroleum gas (Propane)	Version	Magnetic
Corrosion margin	1.00 mm	Nominal pressure	2.5 Mpa
Volume	100 m³ / 10000L	Scope of testing	50~3100 mm
Heat treatment type	Entirety	Precision	2.5 Mpa
Filling factor	420 ( 50°C) Kg/ m³	SAFETY VALVE
Tank & Pressure material	Q345R	Model	A42F-2.5-80
Hydraulic pressure test	2.21 Mpa	Version	Built-in
Gas tight pressure test	1.77 Mpa	Nominal pressure	2.5 Mpa
Cylinder thickness	18.47 mm	Nominal radius	DN80­­
Head thickness	18.42 mm	Opening pressure	1.68~1.76 Mpa
Service life	10 years	Re-seating pressure	≥0.8 Mpa opening pressure
Filling medium	Propane LPG	LOADING AND UNLOADING DEVICE
DETECTION		Inlet pipe	DN50
Standard 1: GB 150-1998 “Pressure Vessels”		Discharge pipe	DN80
Standard 2: “Safety regulation of pressure vessel”		Inlet port	DN50
		Drain valve	Quick Connector type. DN80
Design standard meet ASME, SGS, etc. Another more LPG pressure vessel and accessories, please contact with S-K-Y-P-E Zengertruck		Vent nozzle port	DN80